Our residential dumbwaiters are available in powder-coated steel, or stainless steel cars. These units have the lift capacity of 100 or 200-pound net loads. They include a roll top gate (standard) or you can upgrade to a metal bi-part gate. A removeable & adjustable metal shelf is also available. Safety is assured with standard slack cable monitoring device, car safeties, top final-limit switches, and UL® /cUL® certified controllers.
The dumbwaiter excels at transporting everything from delicate items, foods, files or laundry from floor to floor, to heavy items such as groceries, firewood in a residential application. Custom car sizes allow Waupaca to build dumbwaiters to meet your specific lift needs.
Roll top 100lb dumbwaiter shown here. |
Cable-Waiter Series 007
- Capacity - 100 lbs.
- Travel - Up to 50 ft.
- Stops - Up to 6 stops
- Nominal Speed - 30 feet per minute
- Overhead - 8" minimum, 1'-6" recommended above top of car (additional overhead required for car gates or overhead machine configurations)
- Loading Height - 30" minimum when machine is “rail mounted” below car (overhead or remote machine location and/or pit, required for loading heights below 30")
- Guide Rails - Heavy gauge steel angles.
- Electric Supply - 115 volts, 15 amp single phase.
- Powerhead - Single speed winding drum with 3/4 HP motor.
- Brake - Electrically released and spring applied
- Controls - Momentary contact call/send push buttons at each landing.
- Safeties - Single instantaneous broken cable, applied by a retained compression spring.
- Cable - One, 1/8" diameter steel cable.
- Hoistway Door Interlocks - Required at each landing.
- Emergency Lowering - Manual hand crank.
- Car - Powdercoated steel (standard)
- Stainless Steel (optional)
- Car Gate Options - Roll Top (standard), Bi-Parting (optional)
- Additional Options are available, for details contact see below.
Roll top 200lb residential dumbwaiter shown. |
Paca-Waiter Series 011
- Capacity - 200 lbs.
- Travel - Up to 50 ft.
- Stops - Up to 6 stops
- Nominal Speed - 50 feet per minute
- Overhead - 1’6”minimum, 2’ recommended above top of car (additional overhead required for car gates or overhead machine configurations)
- Loading Height - 36” minimum when machine is “rail mounted” below car (overhead or remote machine location and/or pit, required for loading heights below 36”)
- Guide Rails - Heavy gauge steel channel.
- Electric Supply - 230 volts, 10 amp, single phase.
- Powerhead - Single speed winding drum with 1HP motor.
- Brake - Electrically released, spring applied
- Controls - Momentary contact call/send push buttons at each landing.
- Safeties - Twin instantaneous broken cable, applied by a retained compression spring.
- Cable - 3/16” diameter steel cable.
- Hoistway Door Interlocks - Required at each landing.
- Emergency Lowering - Manual hand crank.
- Car - Powdercoated steel (standard).
- Stainless Steel (optional)
- Car Gate Options - Roll Top (standard), Bi-Parting (optional)
- Additional Options - are available, for details see below
|
